 |
Product Number NX-216
Microprocessor controlled 8-16 zone hardwire expander module for NX panels. Maximum zone count of 48. Can be mounted up to 2500? from the control panel.
|
 |
Product Number NX-216E
Microprocessor controlled 8-16 zone hardwire expander module for the NX-8E. Maximum zone count of 192. Can be mounted up to 2500? from the control panel.
|
 |
Product Number NX-507E
7 relay outputs, 1 open collector output and 8 X10 outputs.
|
 |
Product Number NX-508E
8 open collector outputs and 8 X10 outputs. Built-in parallel interface for local printouts.
|
 |
Product Number NX-534E
Allows a central station operator to monitor the customer?s premises for listen-in purposes or for basic two-way voice communication. Includes speaker and microphone.
|
 |
Product Number NX-534-WH
|
 |
Product Number NX-540E
NetworX NX-540E "Operator II" Telephone Interface Module. Converts any Touch-Tone telephone to a system keypad and allows system functions to be accessed via telephone on premises or off-site. Provides voice prompts.
|
 |
Product Number NX-582E
NetworX NX-582E AES Long Range Radio Interface Module. Microprocessor-controlled AES radio interface. Allows any or all events to be reported via various AES radio modes.
|
 |
Product Number NX-582-WIRINGHAR
|
 |
Product Number NX-584
NetworX NX-584 Home Automation Interface Module with RS232. Provides a standard RS232 bi-directional DB-9 connector for connection to a home automation host system. Programmable levels of security. Selectable baud rate and communication protocol.
|
 |
Product Number NX-590E
The NX-590E Network Ethernet Module and Osborne-Hoffman Network Receiver provide a new level of speed, supervision and email communication to the NX control panel line via broadband and Internet monitoring. This module can be added to any existing or new NX control panel provided that the homeowner has broadband with either a DSL or cable modem.
|
 |
Product Number NX-591E-GSM
The NX-591E offers a secure communications channel to any central station in the event of a line cut event or any other interruption of land line telephone service. The NX-591E utilizes the Cellemetry control channel cellular network for fast and secure transmission of an alarm message to a central station, with the added ability to deliver messages to a subscriber's email or pager for greater functionality.
|
 |
Product Number NX-501E
Adds 3-5 dB gain in poor signal areas.
|
 |
Product Number NX-208E
The NX-208E is a microprocessor controlled 2-wire smoke expander for the NX-6, NX-8, NX-8E, NX-8-CF and NX-8E-CF control panels. One NX-208E module can be added to the NX control panel with a maximum zone count of 8 zones. Up to eight 2-wire smokes can be added to each zone of the NX-208E module for a maximum of 64. Each expander has an optional tamper input, making it ideal for use in a remote location.
|